Range Rover Evoque: Transmission Description - Component Location
Component Location
COMPONENT LOCATION

- Auxiliary battery module
- Transmission Control Switch (TCS)
- Upshift (+) paddle switch
- Downshift (-) paddle switch
- Transmission and Gear Shift Module (GSM) breathers
- Automatic transmission
- Gear Shift Module (GSM)
- Transmission Control Module (TCM)
- Transmission fluid cooler (all markets)
- Transmission fluid cooler (hot climate markets)
Overview
OVERVIEW
The AW F21 automatic transmission is a 6 speed, electronically controlled
unit manufactured by Aisin AW in Japan. The
transmission represents the latest in automatic transmission technology for a
transverse, AWD (all-wheel drive) unit. The
transmission features lock-up slip control, 'CommandShift' functions and
automatic and driver selectable modes to give
the optimum on and off road performance.
The transmission is controlled by a TCM (transmission control module) which
contains software to provide operation as a
semi-automatic 'CommandShift' transmission and a Gear Shift Module (GSM). The
GSM is a rotary actuator which converts
driver selections for P, R, N, D and S on the rotary TCS (transmission control
switch) into rotary movement of the
transmission selector shaft allowing the system to operate as a 'shift by wire'
system, with no mechanical link to the
transmission for drive selections.
The TCM allows the transmission to be operated as a conventional automatic unit
by selecting P, R, N, D, S on the TCS.
Rotation of the TCS to the 'S' position puts the transmission into electronic
'Sport' mode. Operation of the steering wheel
mounted + or - paddle switches puts the transmission into electronic manual 'CommandShift'
mode.
Refer to: External Controls (307-05 Automatic Transmission/Transaxle External
Controls - Vehicles With: AWF21 6-Speed
Automatic Transmission, Description and Operation).
The transmission system uses an auxiliary battery module which powers a failsafe
system to allow the engagement of
'Park' in the event of vehicle power failure.
The AW F21 transmission has the following features:
- Designed to be maintenance free
- Transmission fluid is fill for life
- The torque converter features a controlled slip feature with
electronically regulated lock-up control on gears 2 to 6
- Shift programs controlled by the TCM
- TCM has an adaptive capability to ensure efficient gear shift quality
throughout the service life of the transmission
- Diagnostics available from the TCM and the GSM via the high speed CAN
(controller area network) bus.
READ NEXT:
Control Diagram
NOTE: A = Hardwired; D = High Speed Controller Area Network (CAN) bus; O =
Local Interconnect Network ( LIN)
Battery
Battery Junction Box (BJB)
Engine Control Module (ECM)
Centr
TORQUE CONVERTER
Torque converter housing
Lock-up clutch
Turbine
Impeller
Stator
Fluid pump
Input shaft
The torque converter is the coupling element between the engine and the
transmission
DRIVE CLUTCHES
Multiplate Drive or Brake Clutch - Typical
Input shaft
Main pressure supply port
Piston
Cylinder - External plate carrier
Clutch plate assembly
Baffle plate
Diaphragm spring
O
SEE MORE:
Installation
Special Tool(s)
303-021
Engine support bracket
303-662
Support Beam Arm and Hook Assembly, Engine
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. NOTE: This step is only required if previously
removed.
2. NOTE: This step is only
Steering Column Lock Module (VIM)
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution
of control modules does
not guarantee confirmation of a fault, and may also cause additional faults in
the vehicle being tested and/or the donor
vehicle
NOTES:
If
© 2011-2025 Copyright www.rrevoque.org
