Range Rover Evoque: Using white spirit

Stubborn stains such as tar spots and grease may require the use of white spirt. After use, ensure the area is washed immediately with warm soapy water to remove all traces of the spirit.

READ NEXT:

 Underbody maintenance

Regularly flush the underbody with plain water, and pay particular attention to areas where mud and debris collect. If damage or corrosion are detected, have the vehicle checked by your Dealer/Aut

 Cleaning after off-road driving

Ensure that the areas around air intakes and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the engine t

 Glass surfaces

Clean the rear window with a soft cloth to avoid damaging the heating element. Do not scrape the glass or use any abrasive cleaning fluid. Mirror glass is particularly susceptible to damage. Wash

SEE MORE:

 B-Pillar Outer Panel

Removal NOTES: Within this procedure there are 2 different options depending on type of vehicle body. The b-pillar outer panel is manufactured from mild steel. The rocker panel butt joints must be MIG brazed due to the location of boron reinforcements. 1. The B-Pillar outer panel is replaced in

 Engine Cooling - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION Heater core Air Conditioning (A/C) Evaporator (ref only) Heater inlet hose Heater outlet hose/Oil cooler inlet hose Turbocharger water outlet pipe Water outlet Transmission fluid cooler Electric cooling fan - Left Hand (LH) Radiator top hose By-pass

© 2011-2024 Copyright www.rrevoque.org