Range Rover Evoque: Using the touch screen
Always run the engine during
prolonged
use of the touch screen. Failure to do so
may discharge the vehicle battery,
preventing the engine from starting.
Avoid spilling or splashing liquids onto
the touch screen.
Switching on
- Switch on the ignition.
- Switch on the touch screen.
The most recently used audio source
controls will be displayed (e.g. Radio, CD
etc.).
- Select HOME MENU.
- Select a source.
Note: Available sources will depend upon
options selected at time of purchase.
READ NEXT:
Some touch screen display icons are displayed
on subsequent screens and may not all be
displayed at the same time, e.g.
Back soft key: Touch to return to
the previous screen displayed.
Some menus and control screens will appear
as pop-ups, overlaying the current screen.
Warning and information pop-ups may also
appear on the display. Take notice of any
warnings and follow any on-
Press the hard key at any time to move from
the current display to the Home menu.
SEE MORE:
Removal
NOTES:
The front side member is manufactured from RP260 and DP600.
The front side member section is cut from the front side member and is
manufactured from RP260.
This procedure is written for the LH front side member section replacement, the
LH and RH front side member sections differ i
Removal
NOTE: Removal steps in this procedure may contain installation details.
All vehicles
1. Make the SRS system safe.
Refer to: Standard Workshop Practices (100-00 General Information,
Description and Operation).
2. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery
© 2011-2024 Copyright www.rrevoque.org