Range Rover Evoque: Throttle Body

Removal

NOTES:

Removal steps in this procedure may contain installation details.

Some illustrations may show the engine removed for clarity.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Engine Cover - GTDi 2.0L Petrol (501-05 Interior Trim and Ornamentation, Removal and Installation).

3. Refer to: Engine Undershield (501-02 Front End Body Panels, Removal and Installation).

4.

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

5.

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

6.

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

7. NOTE: Install a new O-ring seal. Torque: 8 Nm

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

Installation

1. To install, reverse the removal procedure.

Fuel Injectors

Removal

1. Refer to: Fuel Rail (303-04C Fuel Charging and Controls - GTDi 2.0L Petrol, Removal and Installation).

Installation

1. To install, reverse the removal procedure.

Fuel Charging Wiring Harness

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

3. Refer to: Intake Manifold (303-01B Engine - GTDi 2.0L Petrol, Removal and Installation).

4.

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

5.

Range Rover Evoque. Fuel Charging and Controls - GTDi 2.0L Petrol

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Fuel Rail

Special Tool(s) 310-198 Installer, Teflon Seal 310-199 Re-shape Tool, Teflon Seal Removal CAUTION: Make sure that all openings are sealed. Use new blanking caps. NOTE: Some variation in the illustrat

 Fuel Pump

Removal WARNING: This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to follow these instructions may result in pe

 Fuel Charging and Controls - Turbocharger - GTDi 2.0L Petrol

Torque Specifications Turbocharger Removal NOTES: Some illustrations may show the engine removed for clarity. Some variation in the illustrations may occur, but the essential information is always

SEE MORE:

 Electronic brake distribution (EBD)

EBD controls the balance of braking forces supplied to the front and rear wheels, in order to maintain maximum braking efficiency. If the vehicle has a light load (only the driver in the vehicle for example), EBD will reduce the braking force applied to the rear wheels. If the vehicle is heavi

 Exterior Lighting - Component Location

COMPONENT LOCATION Instrument cluster Hazard flasher switch Rain/Light sensor Rear height sensor (Xenon headlamps only) Side turn signal indicator lamp Headlamp leveling control module CJB (central junction box) Reverse lamp switch Front height sensor (Xenon headlamps only) Stop lamp swi

© 2011-2025 Copyright www.rrevoque.org