Range Rover Evoque: After towing on four wheels

1. Apply the parking brake. For vehicles with an automatic gearbox, apply the footbrake and then select Park position.

2. Switch off the ignition and remove the Smart Key from the vehicle.

3. Remove the towing attachment and refit the cover panel to the front bumper.

detaching Use extreme caution when detaching towing equipment. Vehicle movement is possible which can result in serious injury.

READ NEXT:

 After a collision

 Before starting or driving

If the vehicle is involved in a collision it should be checked by a Dealer/ Authorised Repairer, or suitably qualified persons, before starting or driving.

 Event data recording

Event data recorders are capable of collecting and storing short sequences of data during a crash or near-crash event. The recorded information may assist in the investigation of such an event. Th

SEE MORE:

 Front End Body Panels

Torque Specifications Fender Removal NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). 2. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 3. 4. 5. 6. Torqu

 Continuously Variable Damping Module (CVD)

Adaptive Damping Control Module (SUMB)  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle  NOTES

© 2011-2025 Copyright www.rrevoque.org