Range Rover Evoque: Instrument Panel Upper Section

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

3. NOTE: The procedure must be carried out on both sides. Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

4. Refer to: Steering Column (211-04 Steering Column, Removal and Installation).

5. Refer to: Floor Console Upper Section (501-12 Instrument Panel and Console, Removal and Installation).

6. Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).

7. NOTES:

The step must be carried out on both sides.

LH illustration shown, RH is similar.

Torque:

Screw 17mm 1.9 Nm
Screw 13mm 1.1 Nm

Range Rover Evoque. Instrument Panel and Console

8.

Range Rover Evoque. Instrument Panel and Console

9. Torque: 1 Nm

Range Rover Evoque. Instrument Panel and Console

10.

Range Rover Evoque. Instrument Panel and Console

11. Torque: 1.5 Nm

Range Rover Evoque. Instrument Panel and Console

12. CAUTION: Take extra care not to damage the instrument cluster face.

Range Rover Evoque. Instrument Panel and Console

13.

Range Rover Evoque. Instrument Panel and Console

14. Torque: 6 Nm

Range Rover Evoque. Instrument Panel and Console

15.

Range Rover Evoque. Instrument Panel and Console

16. CAUTION: Care must be taken to avoid damage to the internal components of the center registers.

Torque: 1.5 Nm

Range Rover Evoque. Instrument Panel and Console

17. Torque: 1.5 Nm

Range Rover Evoque. Instrument Panel and Console

18.

Range Rover Evoque. Instrument Panel and Console

19.

Range Rover Evoque. Instrument Panel and Console

20. Torque: 6 Nm

21. CAUTION: Protect the surrounding trim to avoid damage.

NOTE: With assistance remove the component.

Torque: 6 Nm

Range Rover Evoque. Instrument Panel and Console

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Floor Console

Removal NOTE: Removal steps in this procedure may contain installation details. 1. Refer to: Floor Console Upper Section (501-12 Instrument Panel and Console, Removal and Installation). 2. NOTES: The

 Overhead Console

Removal NOTE: Removal steps in this procedure may contain installation details. 1. CAUTION: Take extra care not to damage the edges of the component. 2. 3. NOTE: Do not disassemble further if the co

 Floor Console Upper Section

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. CAUTION: The procedure must be carried out on both sides. NOTE: LH illustration shown, RH is similar. T

SEE MORE:

 Steering Column

Steering Column - Component Location Upper column Steering wheel Intermediate shaft Steering Column - Overview The steering column consists of an intermediate shaft, the upper column and the steering wheel, which are connected together to transfer driver steering inputs to the steering gear.

 Start guidance

After touching Destination, the system will calculate the route. There is now a choice to select 3 Routes, Change route or to Start navigation guidance. Touch 3 Routes to display a choice of three different route options on the map. The roads on the map are drawn in three different colours to

© 2011-2024 Copyright www.rrevoque.org