Range Rover Evoque: Fuel Tank and Lines - Component
Location
Component
Location
COMPONENT LOCATION - ROW
- Connection to purge valve
- Fuel Low Pressure (LP) sensor
- Fuel fired booster heater - fuel supply pipe connection (if fitted)
- LP fuel supply pipe
- Fuel fired booster heater - fuel supply pipe (if fitted)
- Fuel pump delivery module
- Fuel tank breather pipe
- Fuel filler cap
- Fuel tank filler pipe
- Fuel tank inlet hose and check valve
- Fuel tank
- Charcoal canister (reference only)
- Fuel Pump Driver Module (FPDM)
- Fuel tank vent breather pipe to charcoal canister
- Fuel vapor pipe from charcoal canister to purge valve
- Fuel vapor pipe to purge valve
- LP fuel supply connection to High Pressure (HP) pump
COMPONENT LOCATION - NAS
- Connection to purge valve
- Fuel Low Pressure (LP) sensor
- LP fuel supply pipe
- Fuel pump delivery module
- Fuel tank breather pipe
- Fuel filler cap
- Fuel tank filler pipe
- Fuel tank inlet hose and check valve
- Fuel tank
- DMTL pump
- Charcoal canister (reference only)
- Fuel Pump Driver Module (FPDM)
- Fuel tank vent breather pipe to charcoal canister
- Fuel vapor pipe from charcoal canister to purge valve
- Fuel vapor pipe to purge valve
- LP fuel supply connection to High Pressure (HP) pump
Overview
OVERVIEW
The fuel system is divided into 2 sub systems:
- Low pressure system
- High pressure system.
The low pressure system features the following components:
- Fuel tank
- Fuel pump delivery module in tank
The low pressure system pressure is 4.5 bar (65.3 lbf/in
READ NEXT:
Control Diagram
NOTE: A = Hardwired
Battery
Battery Junction Box (BJB)
Fuel Pump Driver Module (FPDM)
Fuel pump delivery module
Engine Control Module (ECM)
Central Junction Box (CJB)
System O
Special Tool(s)
310-123
Locking Ring, Fuel Tank
Removal
WARNINGS:
Wait for a minimum of 1 minute after the engine has stopped before
carrying out any repair to the fuel injection
system.
Avoid flame
Special Tool(s)
310-123
Locking Ring, Fuel Tank
Removal
WARNINGS:
Fuel may still be present in the fuel tank after draining.
Avoid flames, sparks or lighted substances.
CAUTIONS:
Extreme cleanliness
SEE MORE:
Brake Booster - Component Location
COMPONENT LOCATION - 2.2L Td4
NOTE: RHD (right-hand drive) installation shown, LHD (left-hand drive)
installation similar
Brake booster
Vacuum pipe (vehicles with stop/start system)
Vacuum pump
Vacuum pipe (vehicles without stop/start system)
Non return val
It is important that the correct oil specification
is used. Vehicles fitted with a diesel particulate
filter (DPF) must use the specified oils
otherwise significant engine damage will
occur. Specified oils ensure that the life of the
DPF is maximised.
When a new vehicle is sold into markets wh
© 2011-2024 Copyright www.rrevoque.org