Range Rover Evoque: Charging or replacing the vehicle battery

If the vehicle battery should require charging, the battery must be removed from the vehicle.

Consult your Dealer/Authorised Repairer.

removal and Battery disconnection, removal and replacement should be carried out only by qualified personnel. Consult your Dealer/Authorised Repairer.

Used batteries must be disposed of

Used batteries must be disposed of correctly as they contain a number of harmful substances. Seek advice on disposal from your Dealer/Authorised Repairer and/or your local authority.

READ NEXT:

 Effects of battery disconnection

Disconnecting the battery can affect a number of vehicle systems, especially if there is insufficient battery power prior to disconnection. For example, the alarm may trigger depending on it's sta

 Fuses

 Fuse box locations

Fuse box locations When a fuse box lid is removed, take care to protect the box from moisture, and refit the lid at the earliest opportunity. Engine compartment - fuse box access: 1. Remove

SEE MORE:

 Rear Bumper Mounting

Removal NOTE: The rear bumper mounting is manufactured from mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The rear bumper mounting is replaced in conjunction with: Rear bumper cover Rear bumper Back panel 3.

 Engine Ignition - GTDi 2.0L Petrol

Engine Ignition Principles of Operation For a detailed description of the ignition system, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-07D) Inspection and Verification CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Subs

© 2011-2024 Copyright www.rrevoque.org